Steve Fox Steve Fox

0 Course Enrolled • 0 Course Completed

Biography

試験の準備方法-最高のNSE6_FSW-7.2試験対策試験-検証するNSE6_FSW-7.2ウェブトレーニング

当社FortinetのNSE6_FSW-7.2練習トレントは、99％以上のパス保証を提供します。つまり、資料を真剣に検討し、提案を考慮すると、絶対に証明書を取得して目標を達成できます。一方、FortinetのNSE6_FSW-7.2試験問題を購入する前に、NSE6_FSW-7.2学習ガイドのデモを無料でダウンロードできます。一方、このNSE6_FSW-7.2学習ガイドを引き続き学習したい場合は、Fortinet NSE 6 - FortiSwitch 7.2のNSE6_FSW-7.2試験準備でバランスの取れたサービスをお楽しみください。

Fortinet NSE6_FSW-7.2試験は、Fortinetスイッチの設定、管理、およびトラブルシューティングに必要な知識とスキルを検証する認定試験です。ITプロフェッショナルがFortinetネットワークセキュリティ技術の専門知識を示すのに不可欠な試験です。

>> NSE6_FSW-7.2試験対策 <<

NSE6_FSW-7.2ウェブトレーニング & NSE6_FSW-7.2試験復習赤本

PassTestは毎日24時間オンラインに顧客に対してサービスを提供するアフターサービスはとても良いサイトでございます。最新なNSE6_FSW-7.2情報を1年間に無料にアップデートしております。少ないお金をかかって、一回に合格しましょう。PassTestの問題集は最大のお得だね！

Fortinet NSE6_FSW-7.2（Fortinet NSE 6 - FortiSwitch 7.2）試験は、FortiSwitch製品の展開、設定、および管理に関する知識とスキルを検証したいネットワーク専門家向けの認定試験です。Fortinetはネットワークセキュリティソリューションの主要なプロバイダーであり、FortiSwitch製品ラインはそのオファリングの重要な部分です。この試験は、FortiSwitch製品ラインにおける候補者の熟練度と、これらの製品を使用して安全なネットワークソリューションを実装する能力を評価することを目的としています。

Fortinet NSE 6 - FortiSwitch 7.2 認定 NSE6_FSW-7.2 試験問題 (Q28-Q33):

質問 # 28
Which statement about using MAC, IP, and protocol-based VLANs on FortiSwitch is true?

A. FortiSwitch uses only the Ethernet type to assign traffic to VLANs.
B. It provides benefits that can be obtained when using 802.1X authentication.
C. lt is a scalable and secure solution in comparison to other Layer 2 security measures.
D. Endpoints are required to use the same FortiSwitch port to remain members of the VLAN.

正解：B

解説：
It provides benefits that can be obtained when using 802.1X authentication (C): MAC, IP, and protocol-based VLANs on FortiSwitch are beneficial in network environments where additional granularity is needed in traffic segmentation and security, similar to what can be achieved through 802.1X authentication. These VLAN types allow for dynamic assignment of ports to VLANs based on the characteristics of the incoming traffic, enhancing both security and network efficiency.

質問 # 29
Exhibit.

What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)

A. The FortiSwitch model is equipped with a maximum of 54 interfaces.
B. The CLI commands are enabling a splitpo rt into four 10Gbps interfaces.
C. The port full speed prior the split was 100G SFP+
D. The split port can be assigned to native VLAN

正解：B、C

解説：
Regarding the configuration of a FortiSwitch to split a port into multiple smaller interfaces:
The CLI commands are enabling a split port into four 10Gbps interfaces (Option B): The command shown in the exhibit is typically used to configure a high-speed port (like a 40Gbps or 100Gbps interface) to be divided into smaller, independent 10Gbps interfaces. This feature allows more flexible use of the switch's physical resources.
The port full speed prior to the split was 100G SFP+ (Option C): Given the context of splitting the port into multiple 10Gbps interfaces, the original port configuration likely supported a high-speed transceiver such as 100G SFP+. This would make it technically feasible to divide the interface into multiple 10Gbps channels, enhancing connectivity options without requiring additional physical interfaces.
These configurations and capabilities are typical in modern network setups, especially in environments requiring high density and flexibility in connectivity, allowing network administrators to optimize physical infrastructure efficiently.

質問 # 30
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?

A. Mirrored traffic can be sent across multiple switches.
B. Traffic on the management interface can be mirrored and captured by the monitoring device.
C. The monitoring device must be connected to the same switch where the traffic is being mirrored
D. SPAN can be configured only on a standalone FortiSwitch.

正解：A

解説：
The correct statement about using the Switch Port Analyzer (SPAN) packet capture method on FortiSwitch is that "Mirrored traffic can be sent across multiple switches (A)." This feature allows for extensive traffic analysis as it enables network administrators to configure SPAN sessions that span across different switches, thereby providing the capability to monitor traffic across a broad segment of the network infrastructure.

質問 # 31
Exhibit.

port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)

A. port1 was shut down by loop guard protection.
B. An endpoint sent a BPDU on port1 that it received from another interface.
C. STP triggered a loop and applied loop guard protection on port1.
D. Loop guard frame sourced from port1 was received on port1.

正解：A、D

質問 # 32
Which two statements about the FortiLink authorization process are true? (Choose two.)

A. A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.
B. FortiLink authorization sets the FortiSwitch management mode to FortiLink.
C. The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate serial number.
D. FortiSwitch requires a reboot to complete the authorization process.

正解：A、B

解説：
The FortiLink authorization process is an integral part of setting up FortiSwitch to be managed by FortiGate. The correct statements regarding the FortiLink authorization process are:
C . A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization. This is a part of the FortiLink protocol, where FortiGate communicates with the connected FortiSwitch to establish management and control. This frame initiates the configuration and management process, allowing FortiGate to effectively control the switch.
D . FortiLink authorization sets the FortiSwitch management mode to FortiLink. Once authorized, the management mode of FortiSwitch is set to FortiLink, indicating that it is being managed via a FortiLink connection from a FortiGate appliance. This changes the operational mode of the switch to be under the control of the FortiGate for centralized management and policy application.
Reference:
Further details on the FortiLink setup and authorization process can be accessed through the FortiGate configuration guides available on the Fortinet Documentation site.

質問 # 33
......

NSE6_FSW-7.2ウェブトレーニング: https://www.passtest.jp/Fortinet/NSE6_FSW-7.2-shiken.html

Steve Fox Steve Fox

Biography

About All Next Exam

नमस्कार दोस्तों!

Join Us

Important Pages